0W-30 fully synthetic for VW WIV Longlife II with VW 506.01 for older Longlife and pump-nozzle applications within the group.
0W-30 fully synthetic for VW WIV Longlife II is a targeted solution for older VW Group vehicles that still rely on the Longlife II profile with VW 506.01. The product is designed for petrol and diesel engines with extended service intervals and is especially relevant for vehicles with pump-nozzle technology, where the correct oil choice remains critical.
Unlike modern universal Longlife oils, this oil is clearly tailored to a historically narrower OEM window. If you operate within the existing fleet segment or run a suitable older vehicle, you don’t just need any 0W-30, but one with this exact technical orientation.
The fully synthetic base supports stable flow at low temperatures, clean lubrication during long-distance operation, and the requirements of extended oil change intervals in the appropriate vehicle environment.
Suitable for older VW, Audi, Seat, and Skoda vehicles with Longlife service when VW 503.00, 506.00 or especially 506.01 is required. Particularly relevant for pump-nozzle diesel engines with the appropriate approval.
Why is VW 506.01 still relevant today?
Because there are still vehicles in operation that require exactly this Longlife profile, especially in the pump-nozzle segment.
Can I use a modern 504.00/507.00 oil instead?
That depends on the specific vehicle. Without explicit approval, the required older specification should be followed.
Is this oil only for diesel engines?
No, depending on manufacturer requirements it can also be used in suitable petrol engines with Longlife II requirements.
| Property | Method | Unit | Value |
|---|---|---|---|
| Density at 15 °C | ASTM D-7042 | g/ml | 0.839 |
| Kinematic viscosity KV 40 | ASTM D-7042 | mm²/s | 54.0 |
| Kinematic viscosity KV 100 | ASTM D-7042 | mm²/s | 10.0 |
| Viscosity index | ASTM D-7042 | - | 174 |
| Flash point | ASTM D-92/DIN EN ISO 2592 | °C | 234 |
| Pour point | ASTM D-97/DIN EN ISO 3016 | °C | -45 |
| CCS | ASTM D-5293 | cP @ °C | 4400 @ -35 |
| Total base number | DIN 51639-1 | mgKOH/g | 10.1 |
All types of containers should preferably be stored under cover. If stored outdoors without protection, containers should be kept lying down to prevent water ingress and preserve label readability. Products should not be stored at temperatures above 60 °C and must be protected from direct sunlight and frost.
